Top 5 Best Electric Bike For Long Commute You Should Know About

“Did not work their was slack in the neck and it may be a good product but did not work for my aovo pro.”

“Tardo mucho en llegar a Argentina, más de dos meses. Y el producto no me duro ni dos meses. Empezó a aflojarse y tuve que volver q colocar el soporte original. La verdad que por lo menos a mí no me funcionó.”

“I would like to give a good evaluation, but I can’t. I had to collect this for a very long time, because it came in the wrong assembly initially. Even there is no assembly instruction, but comes in the wrong assembly.”

“It’s like 98% assembled upon delivery.Fun to ride. I’m over 200 lbs and it’s pretty fast for its size. I was pleasantly surprised. Not sure how long /far it will go on one charge (wasn’t paying attention to that on first ride). Definitely fun! Be prepared to have a lot of attention.”

“Wiring did not match colors shown in item picture/description. PAS sensor arrived with red, blue, and yellow wires. Had to swap red & blue wire positions for sensor to operate.Red – 5 volt+ Yellow – Grnd Blue – signal”

“Wiring did not match colors shown in item picture/description. PAS sensor arrived with red, blue, and yellow wires. Had to swap red & blue wire positions for sensor to operate.Red – 5 volt+ Yellow – Grnd Blue – signal Read more”

“Tons of room to take an extra battery, light jacket, etc. The fold out panniers are a bonus for those who are riding longer trips and need extra storage. I really like the hard shell case that keeps its shape. Looks smart on my bike and still a good buy at the current price point. Easy to install or take off when traveling is a bonus as well. IMO it’s a great bag regardless of your biking preferences.”

“This bag is of excellent quality, very well constructed and designed. It’s easy to install on the e-bike. The straps work well and are just the right size for my carrier on the back of the bike. It attached quickly to the bike. The battery goes in and out of the bag very easily. The size is perfect for my large 18 inch battery for my Magicycle Cruiser Pro. I am thoroughly impressed with it. This bag is the best one for the money as it comes with a rain tarp, is larger than the other bags listed, and is the best designed one. I took it for a 16 mile test ride this afternoon and didn’t even notice it was on the bike. Don’t hesitate to buy this one!”

“No is was bad parts of the harness is missing motor and paddle assist won’t work white wire missing I send it back”

“Please see my disclaimer for Vine provided items at the end of this review.This is the worst BDLC controller I have ever seen. Terrible build quality and construction.As can be seen in the photos, there are no matching pairs of MOSFETs in this entire controller. It looks like the components were swept from the floor of the manufacturing facility and thrown into the device. No care was given to using matching components to insure consistent performance or reliability.Either the absolute lowest cost MOSFETs were sourced in bulk (regardless that they were clearly not part of the same manufacturing batch or facility), or these are used MOSFETs pulled from other devices and recycled in this bottom of the barrel product.Skysilicon already has a reputation for being low quality components. And in this controller it appears that random MOSFETs from different product batches or completely different production lines are being used. That is terrible for consistency and reliability.The controller would not even power on.During disassembly I found a capacitor that was not soldered in place. One side was barely hanging on, and the other side was facing the opposite direction from the pad. I did not immediately find any more displaced components, but I also do not know if there other missing parts. There are a lot of blank pads on the board. It is possible other components got knocked off, or where never installed.I attempted to repair the capacitor. Attaching it back to the pad was far more difficult than it should be. My assumption is that the quality of the board and pads are subpar, making it difficult for the solder to properly adhere. Even after cleaning and using leaded solder, the solder did not want to stay attached to the pads. I did finally manage to get it to stick, but this did not fix the controller not powering up.Looking around the rest of the board, the quality and soldering is really poor. A lot of residue and corrosion from bad processing or low quality flux. Did the best I could to clean it up. It did not want to come off easy.On top of this, the documentation does not match the product. There are multiple connectors labeled incorrectly, or are missing entirely. Also many wire colors wrong or mislabeled.The covers at each end of the controller are made of plastic. The plastic is warped and does not lay flat against the aluminum body. Meaning the covers do not seal against the body, which will allow contaminates and water to get inside. The plastic end pieces also double as the mounting point for the controller. I have never seen a controller use plastic before. This is an incredibly bad idea. The plastic can heat up and warp, or crack and fall off from the vibrations a bike may be subject to.The price is not even cheap. There a many much better quality controllers in this same price range.From every angle this product is low quality and a bad value. Do not buy.Price: $34.99 (at time of order)Quality: TerribleValue: PoorVine Review Program Disclaimer:My goal, as part of the Vine program, is to provide clear and informant feedback on product details that matter to YOU. I review every item from the position of a product I have PAID for. Cost, Quality, and Value are all vital points in the decision to purchase a product. Leave me a thumbs up if I’ve helped you determine if a product is worth buying.”